Knob & Tube Wiring in Marrero, Kenner, Metairie, LA and the Surrounding Areas
Is your New Orleans home Knob & Tube Wiring due for an upgrade?
There are many different sorts of wiring nowadays. But there’s a good chance of your electrical wiring being Knob and Tube (commonly known as K&T), especially if you own an older home or office if New Orleans. K&T was the most prevalent wiring method for new homes in the United States from late 1800’s to the 1930’s. Some electricians continued to use it up until the 1970’s. Schedule your knob & tube wiring service in Marrero, Kenner, Metairie, LA and the Surrounding Areas today!
Is your Knob and Tube wiring a catastrophe waiting to happen?
As you can tell these systems are really old, they pose a great amount of risk to life and property. The rubber insulation that runs over the wires can get brittle after being exposed to nature for such a long time. Fire and short circuits could be waiting to happen, from the rubber insulation breaking off.
If you’ve required extra circuits in your old house, many contractors would do a low-grade job to cut corners and splice your existing wires. This would eventually overload your electrical system and could be very dangerous. Prevention is the name of the game. It’s inevitable that you contact licensed electricians in New Orleans area, to get your knob & tube wiring replaced. You might not suspect it at all, but K&T wiring could fail anytime. As the old adage says “Prevention is always better than cure”.
Building code violations
New Orleans homes, with Knob and Tube wiring, dissipate a lot of heat that can quickly cause a fire. It is now made mandatory by the National Electric Code to avoid knob and tube wiring in hollow walls, ceilings, and attics.
What are some limitations of K&T wiring?
K&T Wiring is Not a-Grounded System
K&T is not a grounded system, meaning hazardous voltage can appear in equipment, making it a major safety issue. This also means areas where you can come in contact with water like the bathroom, kitchen and basements become a very risky proposition.
Service Restriction with K&T Wiring
The maximum service restriction for a K&T wiring is 60 amps. Due to the lack of grounding and service restriction, only two-pronged simple kitchen appliances can be used. A modern house needs a minimum of 100 amps service, to accommodate all the modern kitchen appliances – making your life easy in the kitchen and keeping your family happy.
Home Insurance with K&T Wiring
The known hazards of a K&T wiring system is a cause for concern for many home insurance companies. Higher premiums and frequent inspections are part and parcel of homes with a k&t wiring. Some insurance companies might refuse to cover your home without replacing the knob and tube wiring.
Consult Licensed Electrician About Your Knob and Tube Wiring
With various limitations, safety hazards, and high insurance premiums it’s a good idea to consult licensed electricians about your Knob and Tube wiring. Keeping your situation in mind they would suggest the best way forward that would save you from further worries and expenses.